Bendwidth (data transfer) monitoring

[visitor]

Hi!

I am wondering is it possible to measure monthly data transfer (or for some other period of time) on Cisco L3 switch with Pandora. I created network server module (Remote SNMP network agent, incremental data), but all I see is bit rate at the time of measuring (i.e. for every 5 min). SNMP OID I'm using is IF-MIB::ifOutOctets.48

[chejov suzdal voshkov]

with Remote SNMP network agent, incremental data you are measuring data between times if the agent time interval is set at 300 seg, the formula is:
(data_new - data_old) / (timestamp_new - timestamp_old) = data per sec

but if you set a post process equal at time interval, then it shows data (aprox) between measures.

i do this for all fw, switches, links, etc...

[visitor]

Hi chejov and thanks for your replay!

In that case, I misunderstood what that modul measure and is not what I need. Is there any way to measure data transfer?

[Sancho Lerena]

The "SUM" report type made the calculation for you, for example, to know how much bytes has been transferred in the last week.

Hi chejov and thanks for your replay!

In that case, I misunderstood what that modul measure and is not what I need. Is there any way to measure data transfer?